Decatur Georgia Construction Expert Witness Directory

How to Fireproof a Neighborhood

March 17, 2026 — Linda Poon - Bloomberg
As builders in fire-prone areas like California race to reimagine homes for a more fiery future, one developer is zooming out to build entire fire-resilient neighborhoods. KB Home’s developments tackle an issue that’s hard for any individual homeowner to overcome: “You can do your home perfectly, but if your neighbor didn’t, you still have a fire risk,” said Roy Wright, chief executive officer of the research nonprofit Insurance Institute for Business and Home Safety. In other words, to slow the spread of urban fires it takes a village. Read the full story...
Reprinted courtesy of Linda Poon, Bloomberg

Fourth Circuit Extends Coverage to Contractor

May 14, 2026 — Hunton Insurance Recovery Blog
The Fourth Circuit in APAC-Atlantic, Inc. v. Owners Insurance Co., No. 24-1969, 2026 WL 458402 (4th Cir. Feb. 18, 2026) recently endorsed broad coverage for additional insureds, interpreting “arising out of” broadly under North Carolina law to extend coverage to a repaving company under its subcontractor’s liability insurance policy. The court held that an additional insured’s liability “arising out of” a named insured’s work in an additional-insured endorsement means liability “relating to” or “causally connected to” the named insured’s operations, rather than liability defined more narrowly as “caused by” or “the fault of” the named insured. Read the full story...
Reprinted courtesy of Hunton Andrews Kurth LLP

Engineering Seals Versus Contracts ‘Under Seal’ (Two Very Different Things)

May 05, 2026 — Melissa Dewey Brumback - Construction Law in North Carolina
Recently, I was asked by a reader to explain the difference between a document that is ‘sealed’ by an engineer (or architect) and one that is signed ‘under seal’. This question prompted this post, as others may also be wondering about the distinction. [Hi Ed! Thanks for your question] Professionals have ‘seals’ that show that they are registered (Engineers) or licensed (Architects). As most of you likely know, your professional seal is something that is hard won and which is used when—and only when—your plans were made by you or someone under your direct supervisory control. Your signature represents that you were in responsible control over the documents, and that they have met the required professional standard of care. (21 NC Admin Code 2-0206 (a)(11)). Read the full story...
Reprinted courtesy of Melissa Dewey Brumback, Ragsdale Liggett PLLC
Ms. Brumback may be contacted at mbrumback@rl-law.com

Ownership and Licensing in Design Agreements

April 14, 2026 — Abby Dvorkin - Snell & Wilmer
The ownership and licensing of design documents in professional services agreements play a significant role in protecting the interests of the design professional and the project owner during and after project completion. The ownership or licensing of the drawings provision typically outlines who owns the drawings and specifications, who can use the documents, and how the documents can be used during and after the project. Project owners and developers should understand that payment for design services does not automatically transfer ownership or an exclusive right to use the professional design. Under U.S. copyright law, the default rule is that the design professional retains ownership of the instruments of service absent a contractual provision transferring ownership or a license. See 17 U.S.C. § 101, et seq. The Architectural Works Copyright Protection Act provides that copyright protection applies to “pictorial, graphic and sculptural works” and includes “architectural works.” 17 U.S.C. § 102. A design professional may only transfer copyright ownership in writing. 17 U.S.C. § 204(a). Read the full story...
Reprinted courtesy of Abby Dvorkin, Snell & Wilmer
Ms. Dvorkin may be contacted at advorkin@swlaw.com

Data Center Construction and the AEC Partner of the Future

April 14, 2026 — Aarni Heiskanen - AEC Business
During my involvement in designing mobile phone production facilities, the speed of design and construction was critical. Any delay could directly translate into lost revenue. That same logic now applies to data centers, though the stakes are much higher. Instead of optimizing physical production lines, we are constructing infrastructure for digital production. The global data center capacity is expected to nearly double by 2030, and with this level of demand, the traditional project-by-project delivery model begins to show its limitations. Data centers are no longer isolated projects in the traditional sense. They are evolving into repeatable, scalable production systems, making them ideal environments for AEC process and business model innovation. Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

Rebuilding in Fire-Damaged Los Angeles One Year Later

January 26, 2026 — Zoltan Pali - Construction Executive
As wildfires, and subsequent mudslides become more frequent and destructive across Los Angeles, rebuilding efforts must go beyond policy reform to address a critical, often overlooked challenge: the condition of the land itself. Mayor Karen Bass’ recent executive actions–streamlining approvals, reducing fees and allowing rebuilt homes to be up to 10% larger–mark meaningful progress in cutting red tape. But while these changes may make rebuilding easier on paper, difficulties remain hidden beneath the rubble. Before the Blueprint, the Groundwork In hillside neighborhoods like Pacific Palisades, where entire communities have been reduced to ash, rebuilding does not only begin with drawings or permits–it may begin with stabilizing the land. Many of the coastal and hillside neighborhoods are naturally unstable, and since many homes were built prior to 1956–pre-codification of artificial fill for building pads–slope reinforcement, soil replacement, deep foundation systems, engineered grading or some other forms of mitigation are required. These measures are not only time-intense and highly technical, but they are also expensive and often not covered by insurance. Reprinted courtesy of Zoltan Pali, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the full story...

Are “Financial Hardship” Damages Recoverable?

June 08, 2026 — David Adelstein - Florida Construction Legal Updates
In a case out of the Civilian Board of Contract Appeals, F.O.G., LLC v. Department of the Interior, CBCA 8203, 2026 WL 1191881 (CBCA 2026) a contractor claimed damages that included “financial hardship” damages due to slow payments. The financial hardship damages included personal damages to the contractor’s president and his wife. Are these damages recoverable? Drumroll…The Board ruled that the contractor cannot recover such financial hardship damages. As it relates the personal financial hardship damages, the Board ruled, “Neither [the contractor’s] president nor his wife are a party to this contract, are in privity of contract with [the government], or are the beneficiaries under this contract. [The contractor], therefore, cannot recover for any losses that either one has suffered individually and that [the contractor] claimed in this appeal.” F.O.G., LLC, supra. Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris
Mr. Adelstein may be contacted at dma@kirwinnorris.com

Why Construction Tendering Needs Specialized Intelligence

March 31, 2026 — Aarni Heiskanen - AEC Business
The construction industry has never lacked data; it lacks usable intelligence at the moments that matter most. In the high-stakes phases of tendering and pre-construction, the industry still relies on manual “Control-F” searches through thousands of pages of unstructured documents. I recently spoke with Herman Smith, a civil engineer and former Chief Digital Officer at Multiconsult, who left the corporate world to solve this specific bottleneck. His startup, Volve, isn’t just another AI wrapper; it is a specialized “drill” designed to penetrate the complexity of construction documentation. The Paradox of Digitalization without a Productivity Boost For years, the AEC industry has faced a frustrating paradox: we have more digital tools than ever, yet productivity has not improved. Herman observed this from the inside, managing hundreds of unique software licenses while seeing companies struggle to adapt to new workflows. Read the full story...
Reprinted courtesy of Aarni Heiskanen, AEC Business
Mr. Heiskanen may be contacted at aec-business@aepartners.fi

DECATUR GEORGIA CONSTRUCTION EXPERT WITNESS DIRECTORY AND CAPABILITIES