WATERFORD WORKS NEW JERSEY CONSTRUCTION EXPERT WITNESS
DIRECTORY AND CAPABILITIES

Location, Location, Location — But Which One? The Few Words in Your Construction Contract that Pick Where You Fight

June 29, 2026 — Brad Sands - ConsensusDocs
Most professionals know the old real estate line: location, location, location. It turns out to be just as true for construction contracts as it is for property. Consider a recent case involving a project owner that hired two design firms for a project. When issues arose during construction, the owner sued the design firms in state court in Brazoria County, Texas, pursuant to the forum selection clause in the parties’ contracts. The defendants then removed the case to the federal district court in Galveston, a courthouse in a different county. But the owner wanted the case back in Brazoria County state court. Whether it got its wish came down to two words in the contract: “situated in.” This article is about words like those. A construction contract’s forum selection clause names the place for the fight nobody plans to have, and where that fight happens can shape how it goes. This article explains why the wording in your forum selection clause deserves careful reading before you sign a construction contract. It is not a deep dive into the mechanics of federal removal jurisdiction, and it is not an academic comparison of the terms “forum” and “venue.” Instead, it is a practical look at how courts actually read these clauses, so the location of a future fight is the one you intended. Read the full story...
Reprinted courtesy of Brad Sands, Jones Walker, LLP
Mr. Sands may be contacted at bsands@joneswalker.com

---

Communication Gaps Can Cost Construction Firms in the Data Center Boom

June 02, 2026 — Mike Lewis - Construction Executive
The data center construction boom is transforming the construction industry at a historic pace. Fueled by cloud computing, artificial intelligence and relentless demand for digital infrastructure, data centers have become one of the fastest-growing project types in the built environment. Billions of dollars are flowing into new facilities and expansions, creating unprecedented opportunities for construction firms positioned to deliver reliably. But opportunity alone does not guarantee success. As competition intensifies, communication failures and poor information management are emerging as some of the most common (and costly) reasons firms lose margins, miss deadlines or fail to secure repeat work. In data center construction, where schedules are compressed and tolerance for error is minimal, even small breakdowns in communication can have outsized consequences. Reprinted courtesy of Mike Lewis, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the full story...

---

2026 Top Business Risks for Construction and Engineering Companies

May 26, 2026 — Darren Tasker - Construction Executive
The 2026 Allianz Risk Barometer revealed some surprising findings for construction and engineering businesses. Now in its fifteenth year, this annual business risk ranking by corporate insurer Allianz Commercial incorporates the views of 3,338 global risk management professionals on the main perils on their radar for the year. Survey respondents included construction and engineering risk experts who identified the threats keeping them up at night. Here is how they ranked the top industry risks for 2026: Natural Catastrophes Natural catastrophe risk retains the top spot, with 38% of construction and engineering respondents citing this risk as their leading concern for 2026. From the insurance perspective, economic and insured losses remained high, albeit lower than the 10-year average. The evolving nature of natural catastrophes continues to pose significant challenges to businesses and the (re)insurance industry. Insured losses from natural catastrophes are set to reach $107 billion for 2025, according to Swiss Re—the sixth year in a row they have exceeded $100 billion, while economic losses are well in excess of $200 billion. Reprinted courtesy of Darren Tasker, Construction Executive, a publication of Associated Builders and Contractors. All rights reserved. Read the full story...

---

Are “Financial Hardship” Damages Recoverable?

June 08, 2026 — David Adelstein - Florida Construction Legal Updates
In a case out of the Civilian Board of Contract Appeals, F.O.G., LLC v. Department of the Interior, CBCA 8203, 2026 WL 1191881 (CBCA 2026) a contractor claimed damages that included “financial hardship” damages due to slow payments. The financial hardship damages included personal damages to the contractor’s president and his wife. Are these damages recoverable? Drumroll…The Board ruled that the contractor cannot recover such financial hardship damages. As it relates the personal financial hardship damages, the Board ruled, “Neither [the contractor’s] president nor his wife are a party to this contract, are in privity of contract with [the government], or are the beneficiaries under this contract. [The contractor], therefore, cannot recover for any losses that either one has suffered individually and that [the contractor] claimed in this appeal.” F.O.G., LLC, supra. Read the full story...
Reprinted courtesy of David Adelstein, Kirwin Norris
Mr. Adelstein may be contacted at dma@kirwinnorris.com

---

Research Illuminates Pollution Problem in Tijuana River Valley

June 29, 2026 — Jeff Yoders - Engineering News-Record
The Tijuana River watershed between southern California and northern Mexico has been the epicenter of an environmental and public health crisis for more than two decades. Since October 2023 alone, more than 31 billion gallons of raw sewage and polluted water have flowed into the U.S. and, eventually, the Pacific Ocean. Read the full story...
Reprinted courtesy of Jeff Yoders, Engineering News-Record
Mr. Yoders may be contacted at yodersj@enr.com

---

EPA Expands PFAS Reporting Requirements with Addition of New Chemical to Toxics Release Inventory, Published by Law360

June 08, 2026 — Gordon Rees Scully Mansukhani
The U.S. Environmental Protection Agency’s (EPA) addition of sodium perfluorohexanesulfonate (PFHxS-Na) to the Toxics Release Inventory (TRI) introduces new federal reporting requirements for businesses that manufacture, process, or use the chemical. Because reporting obligations apply retroactively to the start of the year, affected facilities must quickly evaluate their compliance and recordkeeping practices. In a recent Law360 article, Gordon Rees Scully Mansukhani Senior Counsel, Ayodeji Ayolola, explains why PFHxS-Na was automatically added to the TRI, how the EPA’s public reporting system works, and which businesses may be affected by the new rule. The article also touches upon key compliance considerations, including supply chain reviews, reporting thresholds for chemicals of special concern, and preparation for public disclosure requirements. Read the full story...
Reprinted courtesy of Gordon Rees Scully Mansukhani

---

PJM’s Reliability Backstop Procurement Proposal—Fast-Track Capacity to Meet Rising Large-Load Demand

May 12, 2026 — Stephen J. Humes, Alicia M. McKnight, Jason Drogin Atwood & Andrew H. Jacobs - Gravel2Gavel
In January, we discussed the Statement of Principles jointly signed by the National Energy Dominance Council and governors across the mid-Atlantic region—framing accelerating demand (especially from large-scale data centers) as an emergency reliability issue for PJM Interconnection, L.L.C. (PJM), the nation’s largest power grid operator. That policy signal is now becoming a near-term, accelerated procurement and contracting exercise. On April 8, 2026, PJM notified stakeholders of a critical issue fast path reliability backstop procurement process. PJM subsequently released a request for information (RFI) with respect to a proposed Reliability Backstop Procurement (RBP)—a one-time mechanism intended to attract significant new capacity to address projected reliability shortfalls driven by large-load growth. RBP compresses what is often a multiyear market and regulatory conversation into a fast-moving set of commercial choices. Developers, large loads, utilities and capital providers should be preparing now for (i) an accelerated bilateral contracting window and (ii) a standardized PJM-led backstop procurement if bilateral deals do not clear enough capacity. Reprinted courtesy of Stephen J. Humes, Pillsbury, Alicia M. McKnight, Pillsbury, Jason Drogin Atwood, Pillsbury and Andrew H. Jacobs, Pillsbury Mr. Humes may be contacted at stephen.humes@pillsburylaw.com Ms. McKnight may be contacted at alicia.mcknight@pillsburylaw.com Mr. Atwood may be contacted at jason.atwood@pillsburylaw.com Mr. Jacobs may be contacted at andrew.jacobs@pillsburylaw.com Read the full story...

---

Course of Construction Exclusions and the CGL Policy

July 20, 2026 — Anna M. Perry, Rachel S. Kindseth & Nina Catanzaro - Saxe Doernberger & Vita, P.C.
I. Course of Construction Exclusions Course of Construction (“COC”) exclusions are found on General Liability and excess liability policies, typically a wrap-up or project specific policy, and generally exclude “all property damage occurring during the course of construction.” Insurers claim COC exclusions are not problematic because they are intended to prevent an overlap in coverage between the general liability policy and first-party property Builder’s Risk policy. However, because General Liability policies and Builder’s Risk policies provide coverage for different risks, COC exclusions can create a gap in coverage for owners and contractors. Therefore, any exclusion on a wrap-up or project specific policy that limits coverage for property damage liability should be scrutinized, and amendments sought when warranted and commercially achievable, for owners, developers and contractors because General Liability policies do not cover the same risk as that of a Builder’s Risk policy. General liability policies provide defense and indemnity to the insured(s) for claims made by a third-party against the insured. Broad COC exclusions serve to preclude coverage for all property damage, not just property damage to the insured project. This includes property damage to property other than the insured project, e.g. an adjacent property. On the other hand, Builder’s Risk policies provide first-party property coverage for direct physical loss to the project during the course of construction. The Builder’s Risk policy will not provide coverage for property other than the project itself (e.g., adjacent property) and it will not provide a defense or indemnity in the event the owner of the damaged property brings a claim against a potentially at-fault party. Reprinted courtesy of Anna M. Perry, Saxe Doernberger & Vita, P.C., Rachel S. Kindseth, Saxe Doernberger & Vita, P.C. and Nina Catanzaro, Saxe Doernberger & Vita, P.C. Ms. Perry may be contacted at APerry@sdvlaw.com Ms. Kindseth may be contacted at rkindseth@sdvlaw.com Ms. Catanzaro may be contacted at NCatanzaro@sdvlaw.com Read the full story...

---